لطفا برای اطلاع دقیق از قیمت محصولات ، حتما قبل از سفارش با واحد فروش شرکت تماس حاصل فرمایید.
توضیحات
کنترلر دما-رطوبت TH300 هانیانگ
کنترلر دما-رطوبت TH300 هانیانگ کنترلر همزمان دما و رطوبت است که ویژگیها و مشخصات زیر را دارد:
- صفحه نمایش لمسی 3.5 اینچی
- ابعاد پنل: 96*96 میلیمتر و عمق 100 میلیمتر
- قابلیت برنامه ریزی 100 الگو و در هر الگو 100 پله (در مجموع میتوان 2000 پله برنامه ریزی کرد)
- کنترل مستقل PID برای دما و رطوبت
- قابلیت اتصال ورودیهای:
- Pt100
- 0 تا 5 ولت مستقیم
- 4 تا 20 میلی آمپر
- سرعت نمونه برداری: 500 میلی ثانیه
- بازه دمای قابل اندازه گیری: از منفی 100 تا 500 درجه سانتی گراد
- بازه رطوبت نسبی: از 0 تا 100 درصد
- دارای 4 کنتاکت دیجیتال ورودی
- دارای خروجیهای:
- 8 کنتاکت دیجیتال رله تیپ A (30 ولت مستقیم 5 آمپر و یا 240 ولت متناوب 5 آمپر)
- 4 خروجی ترانزیستوری N.O
- خروجی SSR با مشخصات:
- 24 ولت DC پالس
- زمان سیکل از 1 تا 1000 ثانیه
- بار مقاومتی بالای 800 اهم
- خروجی Retransmitt جریان 4 تا 20 میلی آمپر برای دما و رطوبت
- خروجیهای انتخابی (optional):
- RS485/422 + USB
- RS232 + USB
- ابعاد کنترلر دما-رطوبت TH300 هانیانگ
:
- عرض 96 میلیمتر
- ارتفاع 96 میلیمتر
- عمق 120.5 میلیمتر (از جلوی پنل تا انتهای ترمینالها)
در صورت نیاز به کنترل ساده دما و رطوبت میتوانید از کنترلر دما و رطوبت مدل FX3DH برند Dotech استفاده کنید.
کنترلرهای برند TemcoLine کره جنوبی نیز در سبد محصولات شرکت آلتون سگال موجود می باشد.
فایل راهنمای فارسی از طریق کانال تلگرام شرکت آلتون سگال به آدرس Telegram.me/AltonSegal قابل دانلود است.
در صورت تمایل به مطالعه مطالب آموزشی” به بخش مطالب آموزشی وب سایت یا کانال اینستاگرام شرکت به آدرس Instagram.com/AltonSegal مراجعه فرمایید
· Suffix code
Model |
Code |
Information |
TH300 |
|
|
Programmable Temperature&Humidity controller (DIN 96 × 96) |
Communication |
1 |
|
RS232C communication |
2 |
|
RS485 / 422 communication |
Language (optional) |
1 |
Korean and English (Standard type) |
2 |
English and Chinese (Simplified Chinese Characters) |
3 |
English and Chinese (Traditional Chinese Characters) |
· Specification
Temperature sensor
(Dry) |
RTP (Pt100 Ω) or 0 - 5 V DC
※ 4 - 20 ㎃ DC (external resistance 250Ω)
※ Pt100 Ω (IEC 751) |
Humidity sensor
(Wet) |
Sampling time |
500 ms |
Measurement range |
Temperature : -100.0 ~ 500.0 ℃ |
Humidity : 0.0 ~ 100.0 % RH |
Digital Input (DI) |
4 contacts (1a X 4) |
Display accuracy |
Temperature : ±0.2 % of FS
Humidity : ±2 % of FS |
Insulation resistance |
500 V DC min 10 ㏁ (between the primary and secondary terminal,
between the primary / secondary terminal and earth terminal) |
Dielectric strength |
2500 V AC 50 / 60 ㎐ (between the primary and secondary terminal) |
Ambient temperature |
0 ~ 50 ℃ |
Ambient humidity |
20 ~ 90 % RH (without dew condensation) |
Storage temperature |
-25 ~ 70 ℃ |
Vibration resistance |
10 - 55 ㎐, amplitude 0.75 mm, 3 directions 4 times, 5 min/cycle. |
Shock resistance |
147 ㎨, 3 directions 3 times. |
Dimension |
96(W) X 96(H) X 100(D) |
Weight |
approx. 582 kg (body + fastener) |
Power supply voltage |
100 -240 V AC, voltage fluctuation : ±10 % |
Power frequency |
50 - 60 ㎐ |
Power consumption |
10 VA max |
Ambient temperature |
0 ~ 50 ℃ |
Ambient humidity |
20 ~ 90 % RH (No dew condensation allowed) |
Storage temperature |
-25 ~ 70 ℃ |
Vibration resistance |
10 - 55 ㎐, amplitude 0.75 mm, 3 directions for 4 times, 5 min/cycle |
Shock resistance |
147 ㎨, to 3 directions for 3 times |
Dimension |
96(W) X 96(H) |
Weight |
Approx. 850 g (included the weight of box) |
Screen rating |
TFT LCD (70.08 X 52.56 mm : 3.5") |
Number of Pixels |
320 X RGB X 240 |
Back light |
Edge Light LED B/L |
Back light life expectancy |
Approximately 40,000 hours |
Touch type |
Register type (4 wires) |
Language |
Korean/English, Korean/Chinese (Simplified Chinese Characters,
English/Chinese (Traditional Chinese Characters). *selected by the suffix code |
Applicable rating |
EIA - RS232C, RS485/422 |
Max number of connection |
RS232C |
1 : 1 |
RS485/422 |
32 devices max (includes the master). ※ address 1 ~ 999 |
Communication type |
RS232C |
Full Duplex |
RS485/422 |
2 wires type half duplex |
Synchronous type |
RS232, 485/422 |
Asynchronous mode |
RS232C |
Approx. within 10 m |
RS485/422 |
Approx. within 1.2 km |
RS232C, 485/422 |
9600 / 19200 / 38400 bps |
Data Length |
RS232C, 485/422 |
7/8 Bits |
Parity Bit |
RS232C, 485/422 |
NONE / EVEN / ODD |
Stop Bit |
RS232C, 485/422 |
1 / 2 Bit (s) |
Protocol |
RS232C, 485/422 |
PCLINK / PCLINK + CRC / MODBUS - RTU |
Response Time |
RS232C, 485/422 |
0 - 999 ms |
Control output (OUT) |
SSR |
ON : 24 V DC pulse voltage, OFF : below 0.1 V DC
Pulse voltage(resistive load above 800Ω) |
Cycle time : 1 ~ 1000 sec |
Retransmission output (RET) |
Temperature |
4 - 20 ㎃ DC (resistive load 600 Ω max)
present value (PV), output amount (MV), set value(SV)
※ by the internal selection |
Humidity |
Resolving power |
7000 max (regarding 4 - 20 ㎃) |
Renewal time |
500 ms |
Digital output (DO) |
Relay |
8 contacts (1a X 8 contacts)
N.O : 30 V DC 5 A, 240 V AC 5 A |
Transistor |
4 contacts (Open collector output).
24 V DC 300 ㎃ max |
Input |
Input compensation |
Temperature : -100.00 ~ 100.00 ℃ Humidity : -100.0 ~ 100.0 % RH |
Dry/wet bulb sensor
compensation |
Compensate the difference between the wet and dry bulb sensor after
removing the wit bulb sensor gauze. |
Scaling |
DC Voltage (V DC) : Input scaling depending on the range variation. |
Input filter |
1 ~ 180 sec |
Input break
detection |
UP scale (in case of the RTD input),
Operation stops when exceeding ±5 % of the range limit. |
Control mode |
Operation method selection |
Constant value control / program control selectable. |
Control action |
Pattern |
100 patterns (100 segments / 1 pattern) |
Segment |
2,000 segments max. |
PID group |
16 group (temperature 4 zones X humidity 4 zones) |
Auto tuning |
Auto tuning depending on the target set value. |
Proportional band |
0.00 ~ 600.00 ℃ (ON / OFF control when value is 0.00) |
Integral time |
0.00 ~ 6,000 sec (OFF state when time is set to 0) |
Derivative time |
0.00 ~ 6,000 sec (OFF state when time is set to 0) |
ON/OFF control |
Set the proportional band to 0.0 |
Direct/reverse control |
Depends on the direct/reverse action of control output. |
Hysteresis |
0.1 ~ 600 ℃ (with humidity, wet bulb temperature or replaced value) |
Retransmission Output |
Temperatureㆍhumidity |
4 - 20 ㎃ DC select among the present value(PV), set value(SV),
and output amount (MV) |
Scaling |
Automatically scales the high and low range (4 - 20 ㎃ DC). |
Alarm setting |
Set alarm |
System alarm : 4 contacts. Alarm 4 contacts per pattern |
Alarm type |
High/low alarm, low deviation alarm and etc (20 kinds) |
Absolute alarm |
Temperature : -100.00 ~ 500.00 ℃ Humidity : 0.0 ~ 100.0 % RH. |
Deviation alarm |
Temperature : -600.00 ~ 600.00 ℃ Humidity : -100.0 ~ 100.0 % RH. |
Hysteresis |
Temperature : 0.0 ~ 600.0 ℃ Humidity : 0.0 ~ 100 % RH. |
Power backup memory |
Saving device |
Internal flash and FRAM, Temperature / Humidity each 86,400 point. |
Saving function |
Save and restore the program information and set value and save the temperature humidity set value and indication value |
2 دیدگاه برای کنترلر دما-رطوبت TH300 هانیانگ
مفیدترین نظرات مشتریان
نوشتن دیدگاه